Installation Guide

How to remove a drawer:

1. Open the drawer to its full extension

2. Reach round the sides and bottom of the drawer and squeeze together the two locking devices located on either side

3. Pull the drawer towards you and lift until the drawer comes free of the runners

4. To re-install the drawer simply place the drawer on the runners and push the drawer closed until the locking device engages with the runner

How to adjust a drawer:

Up & down

Left to right

Front to back

Tilt

How to remove a door:

1. Reach to the back of the hinge placing a finger in the small recess
2. Pull the latch into the cabinet void
3. Repeat for all hinges
4. Remove the door

How to adjust a door:

You will need:

1x small flat head screwdriver (not supplied) – for removing cover caps 

1x Pozi head screwdriver (not supplied)

Side to Side

Up & Down

In & Out

How to adjust door straighteners:

You will need:

1x small flat head screwdriver (not supplied)

1x 10mm spanner (not supplied)

1. Remove the black cover caps located at the bottoms of the doors using the flat head screwdriver
2.  Tighten the nut to adjust the door inwards and loosen the bolt to adjust the door outwards

How to adjust top mounted hinges:

You will need:

1x  screwdriver (Pozi drive – not supplied)

Up & Down

Left to Right

In & Out

How to screw cabinets together:

You will need:

1x  screwdriver (Pozi drive – not supplied)

4x screws provided (30mm – supplied)

N.B. The holes to screw cabinets together will be indicated to with red stickers

How to level a unit:

You will need:

1x  screwdriver (Pozi drive – not supplied)

6x screws (30mm Supplied) 

Packers (supplied)